Your cart is empty
Mfg Item #: 02-191-04238-047
The M4A1 RIII AR15 style firearm features a fully ambidextrous lower that allows both left- and right-handed shooters to operate the bolt catch, safety selector, and magazine release without having to move or remove their dominant hand from the rifle’s grip. Its GRIP-N-RIP Charging Handle is ambidextrous as well. We’ve taken the RIS II picatinny quad rail used on our M4A1 original and replaced it with a 12.5 inch RIS III rail featuring M-LOK attachment for lighter weight while still offering M203 grenade-launcher attachment. The M4A1 RIII is built around a 14.5 inch Cold Hammer Forged Government Profile barrel with a permanently attached Daniel Defense Flash Suppressor. This rifle also comes with the ergonomic Daniel Defense Buttstock and Pistol Grip.
LOWER RECEIVER: Proprietary with Enhanced Flared Magazine Well, Fully Ambidextrous Controls and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 Twist, 14.5" M4 Profile, Chrome Lined, Mil-Spec Heavy Phosphate Coated, and HP/MPI Tested
GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined of 4140 Hardened Steel with Mil-Spec Heavy Phosphate Coating, Mid-length, Direct Impingement
MUZZLE DEVICE: Pinned and Welded Daniel Defense Flash Suppressor, Extended, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
BOLT CARRIER GROUP: M16 Profile, Mil-Spec MP Tested, Chrome Lined, Properly Staked Gas Key
BUFFER: H Buffer
SIGHTS: Sold Separately
HANDGUARD: Daniel Defense RIS III 12.5, Patented, 6-Bolt Bolt-Up System, Flat Dark Earth CNC Machined of 6061-T6 Aluminum
CHARGING HANDLE: GRIP-N-RIP Charging Handle, Body CNC Machined of 7075-T6 Aluminum, Handles & Latch CNC Machined of 6061-T6 Aluminum, Heavy Duty Stainless Steel Roll Pins, Type III Hard Coat Anodized
RECEIVER EXTENSION: 6 Position Mil-Spec 7075-T6 Aluminum
BUTTSTOCK: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding
PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding
Made in the USA!
| Action | semi-auto |
|---|---|
| Barrel | 14.5" Pinned & Welded |
| Finish | Matte Black Hard Coat Anodized |
| Length | 31.5" - 34.75" |
| Sights | No Sights |
| Caliber | 223 Rem | 5.56 NATO |
| Capacity | 32 + 1 |
| Magazine | 1 32 rd. |
| Receiver | CNC Machined 7075-T6 Aluminum |
| Rate Of Twist | 1-in-7 |
| Stock Frame Grips | Collapsible / Folding Stock DD Soft Touch Furniture |
| Additional Feature 1 | FDE 12.5" RIS III M-LOK Rail |
| Additional Feature 2 | Mid-Length Gas System |
| Additional Feature 3 | Fully Ambidextrous Lower |
