BOND ARMS BARREL 40SW 3″ – STAINLESS

Description

The Bond Arms Barrel 40SW is a replacement barrel, in .40 S&W, 3" long.

The barrel is where the chamber and the bore are, so it sets the chambering and, on a threaded barrel, what can be fitted at the muzzle.

Barrels are model-specific. A drop-in barrel is cut to fit a particular slide or receiver without fitting work; a match barrel is usually cut tighter and expected to be fitted by a gunsmith. Which one this is matters before you order.

A threaded barrel is what a suppressor or a muzzle device mounts to. Thread pitch has to match the device – 1/2×28 and 5/8×24 are the common ones and they are not interchangeable. Some states restrict threaded barrels; check yours.

This is a part or accessory, not a firearm, and ships directly to your address.