AREA 419 419-ZERODIE-S300WM S-SERIES 300 7/8 DIE

Description

The Area 419 S-series 300 7/8 is a reloading die.

Dies do the shaping in reloading. A full-length die resizes the whole case back to factory dimensions, which is what makes ammunition chamber in any rifle. A neck die works only the case neck, leaving the body fitted to the chamber it was fired in – less working of the brass, but the ammunition is then specific to that rifle. A seating die sets bullet depth.

Check the thread. Most modern presses take 7/8-14 dies, but large cases and some presses use 1-1/4-12, and the die has to match the press.

This is a part or accessory, not a firearm, and ships directly to your address.